Freescale Semiconductor /MKV58F22 /DMAMUX /CHCFG6

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as CHCFG6

SOURCE=0, ENBL=0, TRIG=0

Description

Channel Configuration register

Fields

SOURCE	DMA Channel Source (Slot) 0 (0): Disable_Signal 2 (2): UART0_Rx_Signal 3 (3): UART0_Tx_Signal 4 (4): UART1_Rx_Signal 5 (5): UART1_Tx_Signal 6 (6): PWM0_WR0_Signal 7 (7): PWM0_WR1_Signal 8 (8): PWM0_WR2_Signal 9 (9): PWM0_WR3_Signal 10 (10): PWM0_CP0_Signal 11 (11): PWM0_CP1_Signal 12 (12): PWM0_CP2_Signal 13 (13): PWM0_CP3_Signal 14 (14): CAN0_Signal 15 (15): CAN1_Signal 16 (16): SPI0_Rx_Signal 17 (17): SPI0_Tx_Signal 18 (18): XBARA_OUT_0_Signal 19 (19): XBARA_OUT_1_Signal 20 (20): XBARA_OUT_2_Signal 21 (21): XBARA_OUT_3_Signal 22 (22): I2C0_Signal 24 (24): FTM0_Channel0_Signal 25 (25): FTM0_Channel1_Signal 26 (26): FTM0_Channel2_Signal 27 (27): FTM0_Channel3_Signal 28 (28): FTM0_Channel4_Signal 29 (29): FTM0_Channel5_Signal 30 (30): FTM0_Channel6_Signal 31 (31): FTM0_Channel7_Signal 32 (32): FTM1_Channel0_Signal 33 (33): FTM1_Channel1_Signal 34 (34): CMP3_Signal 36 (36): FTM3_Channel0_Signal 37 (37): FTM3_Channel1_Signal 38 (38): FTM3_Channel2_Signal 39 (39): FTM3_Channel3_Signal 40 (40): HSADC0A_Signal 41 (41): HSADC0B_Signal 42 (42): CMP0_Signal 43 (43): CMP1_Signal 44 (44): CMP2_Signal 45 (45): DAC0_Signal 47 (47): PDB1_Signal 48 (48): PDB0_Signal 49 (49): PortA_Signal 50 (50): PortB_Signal 51 (51): PortC_Signal 52 (52): PortD_Signal 53 (53): PortE_Signal 54 (54): FTM3_Channel4_Signal 55 (55): FTM3_Channel5_Signal 56 (56): FTM3_Channel6_Signal 57 (57): FTM3_Channel7_Signal 60 (60): AlwaysOn60_Signal 61 (61): AlwaysOn61_Signal 62 (62): AlwaysOn62_Signal 63 (63): AlwaysOn63_Signal
TRIG	DMA Channel Trigger Enable 0 (0): Triggering is disabled. If triggering is disabled and ENBL is set, the DMA Channel will simply route the specified source to the DMA channel. (Normal mode) 1 (1): Triggering is enabled. If triggering is enabled and ENBL is set, the DMAMUX is in Periodic Trigger mode.
ENBL	DMA Channel Enable 0 (0): DMA channel is disabled. This mode is primarily used during configuration of the DMAMux. The DMA has separate channel enables/disables, which should be used to disable or reconfigure a DMA channel. 1 (1): DMA channel is enabled

Links

() ()